by ผู้ดูแลระบบ | Apr 16, 2026 | Polymer and Rubber
Product Serial : QC-662B Vicat Heat Deflection TesterConfirm to ASTM D648 ISO 75-1 Standard The specimen is given a fixed 10N force (or 50N) at the center with a standard Ø1 mm pin, and the temperature should increase by 50 (or 120) degrees Celsius per hour. When the...
by ผู้ดูแลระบบ | Apr 16, 2026 | Polymer and Rubber
Product Serial : QC-657B QC-657B H.D.T. Heat Deflection TesterConfirm to ASTM D648 ISO 75-1 Standard The specimen is given a stress at the center, and the temperature should increase by 2 degrees Celsius per minute. When the specimen’s center area reach the deflection...
by ผู้ดูแลระบบ | Apr 16, 2026 | Polymer and Rubber
Product Serial : QC-640A Impact Specimen Angle Cutting DeviceConfirm to JIS-K7110, ASTM-D256, ISO 179 180 Standard QC-640A can cut a standard V-shaped notch on the standard test piece of the impact test, making the test more stable and accurate for the impact test....
by ผู้ดูแลระบบ | Apr 16, 2026 | Polymer and Rubber
Product Serial : QC-639C、639D Mechanical Impact TesterConfirm to ASTM D256、ASTM D6110、ISO 179、ISO 180、ISO 13802 Standard QC-639 series tester can measure the impact resistance of polymer materials. It calculates the absorbed impact energy based on the energy...
by ผู้ดูแลระบบ | Apr 16, 2026 | Polymer and Rubber
Product Serial : QC-638 QC-638 Vertical Rebound Resilience TesterConfirm to ASTM-D2632 Standard This tester measures rubber elasticity based on free vertical drop hammer test method. The 28 gram of hammer is lifted to a height of 400mm for impact test. Average the 4th...
by ผู้ดูแลระบบ | Apr 16, 2026 | Polymer and Rubber
Product Serial : QC-637 Dropping Impact TesterConfirm to JIS-A5403, K6745 Standard The specimen is placed on the platform of machine. Choose a designated size of steel ball to fall freely from a height, then the steel ball will impact on specimen’s surface. To observe...
