Confirm to JIS-K7110, ASTM-D256, ISO 179 180 Standard
Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. Different hardness materials have different specimen area and thickness requirements. The test must be done 5-10 times to do the average so that the hardness of the material can be correctly recorded.
The load stand can provide an accurate load and increase measurement accuracy and reproducibility when measure hardness. After press flat the specimen and read the highest value at the first time or set up timing to get second value. To test above 5 point of position and to get average value. To be measurement object of thickness and measurement of position, please see each hardness tester of standard data.
Industry : Rubber Industry、 Plastic Industry
| Type | QC-GS |
|---|---|
| Loading Weight | 1 kg, 5 kg 4 kg(optional) |
| Test Stroke | 100~450mm |
| Test Dimension | 16 × 12 × 26 cm |
| Weight | 4.6 kg |
| Tooth Hole | M6 (or appointed) |
| Test Bench Diameter | Ø105mm |
A-type Hardness Tester
C-type Hardness Tester
D-type hardness Tester
- QC-639 Mechanic Impact tester
- QC-913 Digital Metal Impact Tester
- QC-915 Impact Metal Specimen Angle Cutting Device