by ผู้ดูแลระบบ | Apr 10, 2026 | ASKER Hardness Durometer
The ASKER Durometer Type JA for general rubber, conforming to the specifications of the former JIS K 6301. It complied with Spring type hardness tester Type A in the formerly applicable standards of JIS J6301″Physical Testing Methods for Vulcanized...
by ผู้ดูแลระบบ | Apr 10, 2026 | ASKER Hardness Durometer
The ASKER Durometer Type B for semi-rigid rubber (from normal hardness to high hardness), as specified by ASTM D2240 It is used for measuring harder specimens, such as earthenware clay or mossed pottery, than the Type A durometer, because the indentor is spring-loaded...
by ผู้ดูแลระบบ | Apr 10, 2026 | ASKER Hardness Durometer
The ASKER Durometer Type B for semi-rigid rubber (from normal hardness to high hardness), as specified by ASTM D2240 It is used for measuring harder specimens, such as earthenware clay or mossed pottery, than the Type A durometer, because the indentor is spring-loaded...
by ผู้ดูแลระบบ | Apr 10, 2026 | ASKER Hardness Durometer
The ASKER Durometer Type CSC2 for ultra soft (low hardness) and spongy surface materials than those covered by the measuring scope of ASKER Type C and C2, such as soft rubbers, rubber rolls, etc. It is suitable for foam materials such as soft sponges, plastic foams,...
by ผู้ดูแลระบบ | Apr 10, 2026 | ASKER Hardness Durometer
The ASKER Durometer Type F for much softer specimens (low hardness) gives accurate readings as it features a larger indentor and pressure foot.Pressure foot plate is designed to be smaller in dimensions and an oval shape in accordance with the size of powder puff. The...
by ผู้ดูแลระบบ | Apr 10, 2026 | ASKER Hardness Durometer
The ASKER Durometer Type CS is designed to decrease false readings of measurements for polystyrene foam by simultaneously deforming multiple granular foams. The larger indentor and stronger spring than those of the ASKER Type C enable the stable measurement of...
